HIctop i3 Y Carriage Limit Switch Belt Clip
Description
I Redesigned The Y-Belt Clip And Limit Switch. I Did Not Like The Y Limit Switch Being In The Middle Of The Moving Bed. I Have My Wires Break A Few Times. I Designed A Bracket You Can Attach To The Y Motor To And Mount The Switch To It. You Can Then Zip Tie The Wire Down And It Doesn'T Move Or Need To Be Repaired. The Belt Clip Was Modified To Allow For M3 Screws To Clamp Down On The Belts So The Stay Put. Careful To Only Tighten The Screws Slightly Snug Or You Will Break The Abs Part. I Replace The Switch With A Arm That Triggers The Y Limit Switch. I Recommend 100% Infill Printed In Abs.
Statistics
Likes
12
Downloads
0