Makergear M2 Dual Extruder Fan Shroud
Description
This Is An Improved Version Of The Fan Shroud For The Most Recent Version (Dec 2016) Of The Makergear M2 With Dual Extruders. All My Prints Used To Have A Huge Quality Difference Between The Side Facing The Fan And The Side Facing Away From It. The Original Fan Shroud Design By Jsc Solved All These Problems, But It Would Scrape Along The Small Clamps That Hold Down The Print Plate And Could In Some Cases Lead To The Motor Skipping. I Solved All These Issues By Decreasing The Total Height Of The Shroud And Made Some Minor Changes To The Interior (Mostly Fillets). It Comes In Two Parts, But It Is Very Easy To Assemble With Some Hot Glue. Just Like The Previous Version This Prints Without Support. My Suggestion Is To Rotate The Model By 30 Degrees Along The X-Axis And Adding A Skirt. To Mount It To The Printer Remove The Covers On Both Fans And Screw The Assembled Fan Shroud To The Top Fan. To Attach The Part-Cooling Fan You Can Use Either Screws Or Tape, Whatever You Like Best. I Only Used Tape For Quick Prototyping.
Statistics
Likes
5
Downloads
0