Ultimaker 2 / 2+ Cam Holder
Description
Print The Base Upside Down And The Holder Sideways. Mount The Upper Part To The Base Either With 2 M4 Screws (10Mm) Or Melt In M3 Nuts In The Upper Part (These Special Melt-In Nuts, I Love Them...). Use The Two Chassis Screws At The Corner To Fix The Mount. Depending On The Cam You Use You Need A Regular Cam Fixture Screw, Or Print This: Http://Www.Thingiverse.Com/Thing:578514 (This Screw Is Actually Too Small In Diameter For Me And The Thread Does Not Fit). Print Settings Or Material Are Not Critical Here. I Printed With White Pla, 0.1Mm Layers, 2 Perimeters, 25% Infill, 45Mm/S.
Statistics
Likes
11
Downloads
0