HICTOP Wind Guide with 18mm Probe Mount
Description
I Have Modified Eried'S Improved Wind Guide To Add An 18Mm Probe Mount. I'Ve Also Re-Worked The Geometry Of The Duct To Provide Cooling Air Symmetrically About The Nozzle. Update: I'Ve Added A Short Version Of The Wind Guide As The Newer Hictop Printers Appear To Be Coming With A Shorter Extruder Throat. The Original Version Is For A Spacing Of 35Mm Between The Bottom Of The X Carriage Bracket And The Tip Of The Nozzle, And The Short Version Is For A Spacing Of 28Mm.
Statistics
Likes
12
Downloads
0