Dell R710/610 SFF Drive Tray
Description
Ready To Assemble Dell Sff Drive Tray. Everything Was Printed With 20% Infill With Basic Settings Using Pla. Modeled From The Ground Up Using A Dell Oem Drive Tray. The Handle Is Plenty Strong And Allows You To Pull The Drive In And Out Easily. One Rail Does Have A Cut Out So The Drive Can Slide All The Way Into The Back Plane. All You Need Are 4 Screws Just About Any Should Work. The Handle/Connector Is A Tight Fit Into The Two Side Rails Which Give It Some Extra Strength. I Had Some Of These Laying Around From A Different Project: Http://Www.Ebay.Com/Itm/-/180999268972
Statistics
Likes
53
Downloads
0