Duck
Description
I Designed This Stylised Duck Using Fusion 360. I Printed The Object In Two Halves And Joined Them Using The Two Plugs And Glue. This Way I Avoided Using Supports And The Need For A Lot Of Sanding. I Also Included An Stl Of The Complete Duck. The Objects Were Printed On An Ultimaker Original+ Using Colorfabb Bronzefill, And Woodfill For The Stand. Print Settings (Duck): 100 Mm/S, Print Temp At 210 Dc, Bed At 70 Dc, 0.4 Nozzle Size. After Printing And Joining The Two Halves, I Sanded And Polished The Object Until The Bronze Particles Started To Shine. For The Final Finish I Used A Little Brasso.
Statistics
Likes
22
Downloads
0