Tronxy P802 Z-Fixing
Description
Not Compatible With The Round Fan Shroud! However The Mistral 2.1 Works Perfectly. Made A Stabalizer For The Tronxy P802 Z-Axis. You Can Use Any 608 Bearing You Want. The Fit Is 0,3Mm Wider, So It Should Be Easy To Assemble. I Would Recommend Using Sealed Bearings Instead Of The Shown Shielded. Http://Www.Banggood.Com/10Pcs-8X22X7Mm-Deep-Groove-Miniature-Bearing-Sealing-608-2Rs-608Rs-Deep-Groove-Ball-Bearing-P-1052876.Html?P=Iv1908725094201408Tx Http://Www.Gearbest.Com/Novelty-Toys/Pp_615865.Html?Wid=21&Lkid=10619597 Update V2: More Stable Due To Inner 45° Angle. Cut Outs For The Outer Screws. (On The Wrong Side...), Spacers To Fit The Longer Screws Provided With The Printer Update V3: Proper Cut Outs (Chamfer) For The Outer Screws. Raised The Spacers For The Screws A Bit. Chamfers For Easier Insert Of The Bearing And Rod. Assembly Instruction: 1. Move Your Z-Axis To The Top. Remove The Lead Screw, The Rod, The Motor And Coupler. 2. Insert All Screws In The Holder, The Bearing, The Coupler Of The Stepper Motor And Place It On The Mount. 3. Insert The Rod To Go Trough The Acrylic Frame And Tighten The Screws A Bit To The Motor, So The Whole Assembly Can Still Move. 4. Mount The Coupler To The Top, Touching The Bearing And Insert The Lead Screw 5. Make Sure Everything Works Without Any Tension On The Rod Or Lead Screw. The Coupler Can Be Slightly Bend. Thats The Reason We Are Using A Spring Coupler And Then Tension All The Screws. If Sbd Needs Different Dimensions Just Write Me. Dimensions: Distance Leadscrew - Rod: 17Mm Distance Screw Holes: 31Mm Tolerances: 0,3Mm
Statistics
Likes
218
Downloads
0