Prusa i3 MK2/S/3 LED Panel Light ClipOn Upgrade
Description
Ebay Has Some Great *Cheap* 12V 4W Led Panels For Car Interior Lights (Search: [48 Smd Cob Panel Led T10 Car 12V](Http://Www.Ebay.Com/Sch/I.Html?_Odkw=48+Smd+Cob+White+Panel+Led+T10+Car+Interior+Panel+Light+12V&_Osacat=0&_From=R40&_Trksid=P2045573.M570.L1313.Tr0.Trc0.H0.X48+Smd+Cob+Panel+Led+T10+Car+12V.Trs0&_Nkw=48+Smd+Cob+Panel+Led+T10+Car+12V&_Sacat=0)) - Why Not Make A Couple Of Lamps For My Prusa 3D Printer? I Decided To Make A Design Based On The Earlier Designed [Clipon](Http://Www.Thingiverse.Com/Thing:1940114) System For The Main Prusa Frame. As The Led Panel Get Very Hot When Used Directly On 12V, There Have To Be A Good Ventilation Grid For Cooling. Design Challenge: - All Plastic And Easy To Print (No Screws, Etc...) - As Few Parts As Possible - Little To No Post-Processing Of Finished Printed Parts (Edges, Holes, Etc.) - Wires Should Be Integrated In The Solution - Light Should Be Adjustable (Direction) If You Like This Design, You May Also Like: - [Prusa I3 Mk2/S/3 Filament Guide Clipon](Http://Www.Thingiverse.Com/Thing:1940114) - [Prusa I3 Mk2/S/3 Filament Spool Holder Clipon](Http://Www.Thingiverse.Com/Thing:1940105) **Note For Mk3:** Mk3 Uses 24V, Therefore You Have To Use Led Panels For 24V Or Connect Two Lamps With 12V Led Panels In Series. *Please Show Your Great Makings Of This Thing, Leave A Comment And/Or A Tip :-)*
Statistics
Likes
101
Downloads
0