Hictop Prusa i3 (3DP11) Improved Z-Axis Brackets with Bearing

Description

This Is An Improvement On The Mounts For The Z-Axis Rods On The 3Dp11 Prusa I3 Clone By Hictop. This Design Allows Minimal Friction On The Leadscrews For The Z-Axis While Also Improving Stability. Required Hardware: One (Or Two) 8 X 22 X 7Mm Bearing (608Rs) Per Bracket One M3 5Mm Setscrew (If Using Setscrew Version)

Statistics

Category

Tags