Screw Caps
Description
***Screw Caps*** These Caps Press On The Head Of Socket Head Cap Screws. There Are Three Designs; Knurled, Lobed, And Winged For Either A M3 Or M4 Screw. Use A Hammer, C-Clamp, Vice, Or Arbor Press To Press The Caps On The Head Of The Screw. The Press Needs To Be Between .005-.01" To Work Properly. Print One Out And Test It Before You Print Out A Bunch Of Them. If The Fit Is Not Correct Scale The .Stl Slightly In Your Slicer To Correct It.
Statistics
Likes
554
Downloads
0