Ghostbusters Leg Hose Connector
Description
This Is The Leg Hose Connector Used On The Ghostbusters Uniform From The First Movie. It Is Modeled Off Of The Connector Designed By Tgoacher But Has A Much Higher Polygon Count So It Is Smooth. It Will Fit A 1/2" Flexible Hose And Allow You To Use 4 X 10Mm Neodymium Magnets On The Bottom (You Can Find Them Here: Https://Www.Amazon.Com/Gp/Product/B01Ngyfdol/Ref=Oh_Aui_Detailpage_O02_S00?Ie=Utf8&Psc=1). The Magnets Can Be Used With A Metal Plate Or 1 1/2" Washer On The Inside Of The Flight Suit To Keep The Hose Connector Attached. I Modeled A Plug That When Inserted In The Hose Will Produce Enough Friction The Hose Will Not Easily Fall Out Of The Connector. I Also Modeled A Belt Clip To Use That Will Allow The Hose To Clip And Unclip To The Belt Easily.. Here Is The Video I Made For The Hose Connector: Https://Youtu.Be/Y_7-K2Lkx3S
Statistics
Likes
48
Downloads
0