PEX96 - Micro FPV quadcopter brushless 96mm frame
Description
Hello Folks I Was Looking For A Caged Frame Under 100Mm For Interior/Exterior Fpv And Could Not Find One, So I Designed My Own. This Frame Is Designed For 20X20Mm Fc And Esc Mount And For 19/2035 Propellers, This Is A 96Mm Class Frame With Holes For 1103/1105 Motors (Racerstar Br1103 And Dys Be1104 Motors Have Been Tested) I Build This Frame Around The Parts I Wanted So I Recommend To Check My Part List: - [Piko Blx F3](Http://Www.Banggood.Com/Cleanflight-Betaflight-Micro-F3-Flight-Controller-Built-In-Pdb-Buzzer-20X20Mm-For-Fpv-Racing-P-1094615.Html?P=V820093335833201512P) - [Cicada 4In1 10A](Http://Www.Gearbest.Com/Multi-Rotor-Parts/Pp_606090.Html) Or [Multistar 4 In 1 10 A](Https://Hobbyking.Com/En_Us/Blheli-S-4-In-1-20A.Html) - [Eachine Vtx03](Http://Www.Banggood.Com/Eachine-Vtx03-Super-Mini-5_8G-72Ch-025Mw50Mw200Mw-Switchable-Fpv-Transmitter-P-1114206.Html?P=V820093335833201512P) - [Ipex To Sma Mushroom Antenna](Http://Www.Banggood.Com/7Cm-2_5Dbi-3Dbi-5_8G-4-Leaf-Rhcp-Micro-Clover-Antenna-Ipx-Ufl-For-Mini-Fpv-Vtx-P-1115275.Html?P=V820093335833201512P) - [600Tvl 120 Degree Camera](Http://Www.Banggood.Com/600Tvl-1_8Mm-14-Cmos-120-Degree-Wide-Angle-Lens-Fpv-Camera-Palntsc-3_7-5V-P-1092333.Html?P=V820093335833201512P) - [Fd800 Tiny Frsky 8Ch Ppm/Sbus Receiver](Http://Www.Banggood.Com/Fd800-Tiny-Frsky-8Ch-Ppmsbus-Receiver-Compatible-Frsky-Accst-X9Dplusdjtdftdht-For-Qx95-Qx90-P-1108071.Html?P=V820093335833201512P) - [Dys Be1104 6500Kv Motors](Http://Www.Banggood.Com/Dys-Be1104-1104-Brushless-Motor-5400Kv-6500Kv-7000Kv-2-3S-For-100-120-150-Mini-Multirotors-P-1048677.Html?P=V820093335833201512P) - You Can Use Any 19/20 Props, But I Recommend The [Furious Fpv 2035-4 Propellers](Http://Furiousfpv.Com/Product_Info.Php?Products_Id=93) - Lipo [Tattu 450Mah 75C](Https://Www.Rotorquest.Com/Tattu-450Mah-74V-75C-2S1P-Lipo-Battery-Pack-With-Xt30-Plug-Long-Size-For-H-Frame-109336.Html?Search=Tattu), [Tattu 650Mah 75C](Https://Www.Rotorquest.Com/Tattu-650Mah-2S1P-75C-74V-Lipo-Battery-Pack-With-Xt30-Plug-109335.Html?Search=Tattu) And Cheap [Zop Power 500Mah 45C](Http://Www.Banggood.Com/Zop-Power-11_1V-500Mah-45C-3S-Lipo-Battery-Xt60-Plug-P-1088324.Html?P=V820093335833201512P)(I Switched The Plug To Xt30) It Is Compatible With The [Eachine Minicube](Http://Www.Banggood.Com/Eachine-Minicube-20X20Mm-Flytower-Compatible-Frsky-Flysky-Dsm2-Dsmx-Receiver-F3-Blheli_S-10A-Esc-P-1127223.Html?P=V820093335833201512P) And All 20X20 Mouting Fc And Esc. You Will Need 14 M3 Nylon Spacers (20Mm) + 28 M3 Screws (6 To 8Mm) It Should Be Very Durable And Lightweight Depending On Your Filament Type And Quality. I Would Recomment To Use Nylon Or Carbon Fiber Filament. I Will Add Mounts/Adapters/Parts Soon (Camera & Vtx Mount, Landing Pads...) Check My Camera Mount (Wip): Http://Www.Thingiverse.Com/Thing:2208985 !!! ------ *Note That I Can Print It For You In Black Alloy 910 Nylon And Send A Full Kit Including Spacers And Screws!* =------ !!! [Order A Full Kit Here](Http://Makertuts.Com/Contact/) :) It Takes Me A Lot Of Time To Design These Parts From Scratch. Please Help Me Develop New Parts And Release Them For Free / Pay Me A Beer To Say Thanks On Http://Paypal.Me/Supportp3X
Statistics
Likes
132
Downloads
0