Raspberry Pi Zero W Acrylcase (2mm)

Description

Protect Your Raspberry Pi Zero W With This (2Mm) Acrylcase! I Designed This Case Completly From Scratch And It Fits Just Perfect On My Rpi Zero W. Even A Pimoroni Blinkt! Module Fits On Top Of The Gpio Pins. The Little Rectangles On The Middle Plate Might Be Not Necessary But They Could Avoid A Brownout Of The Coil On The Rpi Zero W Pcb. In Case You Mount A Heatsink Onto The Cpu, It Should Have Following Dimensions: 13Mm X 12Mm X 5Mm. Don`T Worry About The Mini-Hdmi And Micro-Usb Ports! I Tryed Out The Fattest Plugs And Adapters And I Had No Problems Plugging Them In. !The Cad-File Is Made For Lasercutters! I Used A Trotec Speedy400 (80W Co²-Tube). Cut Z-Offset: -1Mm What You Will Need: 2Mm Acrylicglass (At Least 105Mm X 72Mm) 4X M2,5X12 Bolts 4X M2,5 Nuts 24X M2,5 Washers

Statistics

Category

Tags