FIlament Holder
Description
<B>Filament Holder For Prusa Hephestos I3</B> Allows Smooth Sliding Of The Coil, Avoiding Pulling. In Addition To The Printable Parts You Need The Following Components: Two Bearings With 22 Mm Outer Diameter And 10 Mm Internal Diameter. A Threaded Rod Of At Least 176 Mm In Length And 10 Mm In Diameter. <B>Description Of Parts:</B> * 2 X Soporte.Stl - Side Supports. * 2 X Sop_Bobina_Huecos.Stl - Supports Coil. * 2 X Tope_Roda_C.Stl Or Tope_Roda.Stl - Side Nuts, The Threads Must Be Made By Forcing The Threads Into The Rod. * 2 X Tope_Final.Stl - Separators Between Fasteners And Supports. * 1 X Separador_Bobina_Estrecha.Stl - Optional Part, Separate The Bearings Between Them For Narrow Coils. * 1 X Separador_Bobina_Ancha.Stl - Optional Part, Separate The Bearings Between Them For Wide Coils. In Addition To The File For Scad, The File For Freecad Is Added So That It Can Be Easily Modified: Support_Filamento_Prusa_V3.Fcstd
Statistics
Likes
6
Downloads
0