E-liquid mixer (THE HARDUISTEEPER), OpenSCAD version

Description

This Is An Openscad Version Of The Excellent E-Liquid Mixer "The Harduisteeper" By Peterco014: Http://Www.Thingiverse.Com/Thing:1987389 The Micro Servo 9G Model Used Is Done By Thecase, With Some Slight Modifications: Http://Www.Thingiverse.Com/Thing:29734 It Is An Amazingly Effective And Cheap Mixer For Two E-Liquid Bottles (30Ml To 50Ml). It Works Even With 100% Vg Mixes. I Had A Bunch Of "El Cheapo" Arduino Mini 168 Laying Unused In A Box, So An Adaptation Was Needed To Fit This Model. Having It In A Parametric Form Also Allows Easy Modifications And Adaptations. See The Source Code For Comments On Options. **Hardware Needed:** - Servo Motor: Micro ("9G" Type) - Ball Bearing: 10Mm Ed, 3Mm Id, 4Mm Width (Can Be Adapted In Source Code) - Arduino Pro Mini 168 "Baite" (For Example: Https://Www.Aliexpress.Com/Item/1Pcs-Pro-Mini-328-Mini-Atmega328-5V-16Mhz-Free-Shipping/1432585134.Html ) - A Micro-Usb Pcb (For Example: Https://Www.Aliexpress.Com/Item/10Pcs-Micro-Usb-To-Dip-Adapter-5Pin-Female-Connector-B-Type-Pcb-Converter/32720363831.Html ) - A Common Cathode 5Mm Rgb Led - 3 Resistors (2X470R + 1X560R) - 4X Round Foam Pads For Feets (37Mm Diameter), Optional - Some Screws (See Source Code Header Comments) I Included My Quick Adaptation Of Peterco014'S Original Arduino Code. My Version Has A Pause Between Cycles And The Movement Speed Is Ramped Progressively. Feel Free To Contribute Modifications... The Comments Are In French, As They Were In The Original File, But I Can Provide A Translated Version If Needed.

Statistics

Category

Tags