Flexible Cree LED mount - for Anet A8 or other usecases
Description
The Flexible Tubing Was Remixed And Extended With A Cree Led Case And Endpiece For My Anet A8. Also Usable For Other Things, The Clamping Is Designed With Thin Walls, So U Can Easily Make It Fit For Your Needs With A Side Cutter Or Similar . It Can Be Clamped To Walls With A Thickness Up To 9Mm, For More U Have To Rescale.. There'S Also The Possibility To Use A Switch With A Diameter Of 4Mm Or Similar. With Those Parts And Scaling In Ur Slicer, U Can Create Led-Mounts With A Length Or Size For Ur Requirements. But Ist An Empirical Print-Process. So, Its Not A Print-Ready "Thing", Consider! Start With The "Case_Creeled_With__Beginning.Stl" Without Scaling If U Want To Use A Led Like Its Shown On The Photo. Then Adjust And Print The Following, Required Parts With Scaling. I Scaled The Middle Piece 3 Times In Cura For My Composition Which You Can See On The Photo. Also The Endpiece Has To Be Scaled Up Which Depends Of The "Arm" Length And Ur Printer Tolerances. After Printing The Case With The First Tubing, I Scaled The First Middle Piece To 105% (1,05)). It'S Made For A Cree Led Like On The Photo. In My Case The Cree Is Driven With 100Ma, If You Want To Use More, Consider To Use Abs!
Statistics
Likes
19
Downloads
0