Traxxas 5247 to Carbon Tube Coupler With Compression Lock
Description
This Coupler Was Created To Serve A Specific Purpose: To Connect The Traxxas 5347 Ball Joints To 1/2" Carbon Fiber Tubes For Use On The Large Delta Style 3D Printer I'M Creating, Based On Parts And Designs For The Mini Kossel. I'M Using 24" Long And 0.5" Outer Diameter Carbon Fiber Tubes For The Effector Arms. So There Is A Bit Of A "Gap" Between The Traxxas Joint Shafts, Which Measures Around ~7Mm In Its Outer Diameter. The Inner Diameter Of The Traxxas Shaft Takes An M4 Threaded Bolt. If You Are Building A Large Delta Printer And Are Using Traxxas 4257 Joints And Want To Use A Large Diameter Shaft, This Might Be Of Help. Work In Progress, So Only Uploading The Stl At This Point. I Mainly Designed This Because I Didn'T Like Using Glue And Wanted Something I Can Adjust/Maintain. Hence This Design. Update: Added A Another Stl, Which Does Not Have The Little Balls, For Those Who Want To Do Their Own Support Material. Also, After Printing It, The Balls Really Don'T Want To Be Removed. :) Though They Will Flex A Bit To Allow Capture Of The Carbon Fiber Tube/Rod. Note: The Ridges In The Photographs Are Due To Ribbing On My Printer(Cheap Threaded Rod). A Printer Without The Issues Of My Printer Will Print Smooth Walls.
Statistics
Likes
16
Downloads
0