Another Universal Spool Roller
Description
This Is An Adjustable Spool Roller To Accommodate Different Size Spools Without Having To Unscrew Anything To Change Filiments. You Need To Print 2 Of Each Part. -You Will Need 4 Bearings -608Zz (I: 8Mm / D: 22Mm / W: 7Mm) -2 Bearings Press Onto Each Female Part -Once Bearings Are Set On Female Part Slightly, Press Male Part Carefully Until Fully Seated (May Need To Use A Vise To Press Together) -One Side Attaches Into Recessed Squares And If Wanted Can Be Secured In Place Using 1/8" Screws. -Mounts Can Be Attached In Fixed Location Using 1/8" Screws As Well. -Second Roller Set Slides In Channel To Accommodate Different Spool Sizes.
Statistics
Likes
6
Downloads
0