4Axis Foam Cutter
Description
I'Ve Printed This And It Is Working. Altho You'Ll Have To Make Your Bow Rest On The Vertical Axies By Yourself, I Guess Predrilling And Inserting A Metal Hook-Screw Would Do. Designed For Nema17 On All Axis, 8Mm Verticals And 25Mm Horizontals (Because Them Are Free For Me) And M8 Threaded Rod With M8-Nuts Pressed Into The Carriages. I Have Some Binding Issues, Probably Due To Alligning The Bearings And Aligning The Nuts, Bent M8 Rods) I Am Thinking About Redesigning For Bushings Instead. Since The Photo Was Taken I Have Moved The Drivers To Inside The Case And Use Db9 And Ethernet Cables For Motors. 5Th Axis I Have Not Used Yet (17/03/25) Non-Plastic Parts Are: * 4 Lm8Uu Bearings. * 8Mm Verticals. (As High As You Want. 600Mm In Pic) * 4-8 Lm25Uu Bearings (I Use 8). * 25Mm Horizontals.(As Long As You Want. 700Mm In Pic) * Nema17 Motors. * Stepper-Drivers. * M8 Nuts + Threaded Rods * M3-Screws For Assembly * 22Mm Skateboardtype Bearings For Passive Sides.
Statistics
Likes
52
Downloads
0