Even More Extended Spool Holder for Wanhao Di3/Maker Select/Cocoon Create
Description
Needed A Longer Spool Holder For A Surprisingly Wide Roll Of Wood Filament. I Ended Up Extending Plaidpineapple'S And It Seems To Work Great. Included Are Versions With The Main Cylinder At Both 95 And 100Mm. 100Mm Is The One In The Photos. I Was Able To Print This In Under 3.5 Hours By Printing The Main Cylinder At High Speed/Low Resolution And The Brace And Threads At Lower Speed/High Resolution. I Used Abs With 40% Triangular Infill And Three Perimeter Layers And It Seems To Be Solid. It Also Produces Less Friction Than The Original Spool Holder Due To The Glossy Finish Of The Abs (Pla Would Presumably Produce The Same Effect, But I Do My Printer Parts In Abs So I Don'T Know For Sure - Would Love To Get Some Feedback If Someone Tries This!). Printed Standing Up With The Threaded End At The Top. No Raft Or Supports. Attaches Using The Existing Spool Holder Nut. It'S A Good Idea To Thread That On Once Before Installation Just To Break Things In A Bit.
Statistics
Likes
18
Downloads
0