Azteeg X5 Mini v2.0 bracket
Description
This Is A Remix Of Part A26 Of The [Eclips3D - High Resolution Corexy 3D Printer By Ddegonge888](Https://Www.Thingiverse.Com/Thing:1242295), Modified To Accommodate The V2 And V3 Versions Of The [Azteeg X5 Mini](Https://Www.Panucatt.Com/Azteeg_X5_Mini_Reprap_3D_Printer_Controller_P/Ax5Mini.Htm). This Also Adds In The Features From The [Mini Usb & Switch Mount](Https://Www.Thingiverse.Com/Thing:1481495), For A Spst Snap In Rocker Switch (E.G. [This One](Http://Www.Amazon.Com/3Pcs-Green-Light-Rocker-Switch/Dp/B006Z96Cji) From Amazon) And A Mini Usb B 5 Pin Male To Female Extension Data Cable Adapter Joiner Coupler Cord (E.G. [This One](Https://Www.Amazon.Com/Gp/Product/B00S5Lont0) From Amazon; Note That Most Short Extensions You'Ll See Are 25 Cm, You Need One That'S Slightly Longer: 1 Ft). This Mount Fully Encloses The Switch, And Has A Provision For The Cables To Exit The Mount Body. There'S An Optional "Bumper" For The Opposite Side Of The Frame So That The Printer Will Lean Evenly When Tipped On That Side.
Statistics
Likes
1
Downloads
0