CR-10. CR-10-S4 Filament Spool Adapter Bushing
Description
Update: June 25, 2017 I.D. Was Enlarged On 3 Pieces To 33.48Mm. Some Feedback Brought To My Attention The Shaft Diameter On Their Printer Was 33Mm. Creality Did Change The Design On Latest Printers. I Should Have Measured The Change When Shipping The Printers Out. :) Both Versions Are Available Here. If You Cannot Measure Yours, Print The End Cap Part With Larger I.D. Of 33.48. It May Be Looser, If You Have An Early Design, But It Will Help You Check. Btw, I.D. Stands For Inner Diameter. Update: April 7, 2017 I.D. Was Enlarged On 3 Pieces By 0.31 Mm. Some Feedback Suggested It Was A Tight Fit. This Should Help. I Consider This A Must Print, If You Own A Cr-10, Cr-10-S4, Afinibot A31 (Same As Cr-10). There Are Three Files. The First File Is The Macewen3D Logo'S Bushing. The Second And Third File Has Additional Adapters Which Can Be Used To Securely Mount Various Brands Of Filament Spools, Which Are Narrower (Protopasta, And Smaller Inner Diameter, E-Sun, As Well As Hatchbox, And Many Others_. This Will Also Print Well With A 0.8Mm Nozzle, For Speed. 0.4Mm Nozzle Will Allow Crisper Text. (No One Will See It.) You Should Need No Cleanup. Pla, Is Just Fine. Helping Out. -Ryan Macewen
Statistics
Likes
53
Downloads
0