terraPin Box Turtle 4X5 Pinhole Camera
Description
One Sheet; One Shot! The Terrapin Box Turtle Is Designed For 4X5 Sheet Film Or Photographic Paper And Consists Of Only Four 3Dprinted Parts. The Front And Back Halves Slide Together To Sandwich A Sheet Of Film 75 Mm (Or 35Mm) From The Pinhole. The Shutter Is Designed Around Four (4) Rare Earth Magnets, 8Mm X 3Mm, That Hold The Shutter In Place And Work As Pivot Points When Snapping The Shutter Open Or Closed. Behind The Shutter, The Pinhole Is Mounted With A Locking Cam-Clamp. All Photos By [Moni Smith](Http://Www.Monismithphoto.Com/) Using Either Fujifilm Neopan Acros 100 B&W Film, Or Kodak Ektar Color Negative Film. Expanded Information And Instructions Coming Soon! Box Turtle 75 Focal Length 75 Mm Pinhole 0.30 Mm Diameter F/256 Box Turtle 35 Focal Length 35Mm Pinhole 0.20 Mm Diameter F/215 (Nominal) Photos Are Of Early Prototype, Stls Differ In Detail. Notes - Added 35Mm Wide Angle Version - Revised Shutter And Pinhole_Clamp To Work With Both 75 And 35Mm Versions - Added Some Light-Trapping To Front Of Camera, To Minimize Light Leaks From Box Joint. - Added Small Indexing Pips To Hold Pinhole_Clamp In Position W/O Glue ___ **Attention** This Work Is Licensed Under The [Creative Commons - Attribution - Non-Commercial License](Http://Creativecommons.Org/Licenses/By-Nc/3.0/). This License Applies Only To The Files And Documents Available For Download From The **Thing Files** Section Of This Thing. **All Other Related Content (Photographs, Videos, And Verbiage Such As Contained In "Description" Or "Instructions" ) Are Excluded From This License, With All Rights Reserved, Unless Specifically Available For Download** This Notice Constitutes A Clarification, Not A Change, To Licensing For This Design.
Statistics
Likes
62
Downloads
0