Fidget spinner with a little flair
Description
This Is A Small Variant On The Fidget Spinner. It Has A Little Triforce Pattern In The Middle To Distinguish It A Little From The Common Ones You See On Amazon. All You Need Is Some Skate Bearings To Fill In The Holes And You Are Good To Go. I Have Also Found That If The Finger Pads Want To Fall Out That A Little Superglue Will Hold Them In Good. Also, I Printed The Finger Pads In A High Quality To Give Them A Nice Smooth Feel. Have Fun. Here'S A Link To Some Cheap Bearings If You Plan To Make A Bunch. This Is Another Iteration Of A Fidget Spinner. These Have Become Popular At My Son'S School And There Have Been Requests For Different Designs. This Is One Of Those Designs. It Tapers Out At The End Instead Of Growing Bigger Making The Feel Of The Spinner A Little Different. The Rough Edges Have Been Smoothed A Little To Make It Easier To Hold In The Hand. Have Fun With This One. Here'S A Link To Some Cheap Bearings If You Can Handle The Wait. Https://Www.Aliexpress.Com/Item/10Pcs-Abec-7-Deep-Groove-Ball-Bearing-608Zz-8X22X7-Mm-Bearing-Steel-608-Zz-Skating-Bearing/32642302386.Html?Spm=2114.13010608.0.0.Zypkcc
Statistics
Likes
4
Downloads
0