SCARA Arm Milling Attachment
Description
Evezor Is A Scara Class Robot And Today We Milled The Open Source Initiative'S Logo See A Video Of The Making Of Here Https://Www.Youtube.Com/Watch?V=Lswo7V0Rduo Our Tool Post, Once Again, Was Just A Hunk Of 2X4. Then We Used A Hose Clamp To Secure The Router To The Tool Post. We Used A 3/8" - 2 Flute Endmill The Toolpath Was Created With Kiri:Moto. With All These Projects, For Better Or Worse, I Tried My Best To Use Open Source Software. I Would Have Made A Tutorial On This If I Didn’T Have Such A Bad Experience Using The Software. It’S Not The Worst Software Ever But Made Some Unusual Decisions With Some Of Its Toolpaths. I Will Be Looking For Some Better Software, If You Have Some Suggestions Please Leave A Comment. Find Out More About Our Arm At Http://Www.Evezor.Com See Our Other Projects And Toolheads We'Ve Made With Our Arm Hot Wire Foam Cutting Http://Www.Thingiverse.Com/Thing:2194430 Glass Etching Http://Www.Thingiverse.Com/Thing:2196442
Statistics
Likes
31
Downloads
0