ESP8266 Programmer
Description
To Put The Esp8266 Into Programming Mode We Need To Hold The Gpio0 Input Low During A Reset Or Power Up Cycle. The Nodemcu Module Takes Care Of That During Programming, No Need To Press Any Buttons Just Program From The Arduino Ide. The Nodemcu Module Takes The Gpio0 Low And Briefly Holds The Reset Low, Then The Ide Programs The Chip. Try Increasing The Arduino Ide’S Upload Speed. 230400 Baud Works Well And Saves Time. Parts Nodemcu Board - Http://Www.Ebay.Com/Itm/Nodemcu-Lua-Esp8266-Ch340G-Wifi-Internet-Development-Board-Module-/161833537754?Hash=Item25Ae07D0Da:G:D0Maaosw4Djyhbmj 5Mm Green Led Bc184L Npn Transistor (Or Any Signal Transistor) 10K Resistor 2K2 Resistor 330R Resistor (Oups Missing From Schematic) 6 Pin 90 Degree Header Prototyping Board, Cut To Size. 6Mm Tact Switch With 7Mm Or Large Button See Youtube For More Details = Https://Www.Youtube.Com/Watch?V=P2Uc_Ufzns8&Feature=Youtu.Be
Statistics
Likes
41
Downloads
0