Pro-Line Ambush Leaf Spring
Description
I Designed This To Replace The Metal Leaf Springs On My Pro-Line Ambush Rc Crawler. The Metal Leaf Springs Get Kinked Often And Are A Bit Too Stiff For My Liking. So I'M Hoping This Will Be A Much Softer Ride, Allow The Vehicle To Sit A Little Lower, Offer More Articulation, And Not Get Kinked As Easily. Let Me Know If You'D Like To See Anything Else For The Pro-Line Ambush! Update! The Original File Was Too Thin! I'Ve Updated And The New File Is Proline Ambush Leaf Spring Replacement V0.2.Stl Update! I Think Having The Holes In The Design Compromises And Complicates The Print. I Added A Version That Does Not Have Any Holes As Well As A Version That Does Not Have The Center Hole. Print Then Drill Out The Holes As Needed. The Center Hole Is Approximately 1Mm And The 2 Eye Holes Are 3Mm. I Haven'T Tested This Out Yet. I Think That The "Proline Ambush Leaf Spring Replacement No Center Hole.Stl" File Will Likely Be The Best Print.
Statistics
Likes
79
Downloads
0