FPV Camera mount fatbee FB90 / CM275T on e010 0.4g (customizable)

FPV Camera mount fatbee FB90 / CM275T on e010 0.4g (customizable)

Description

Inspired By The Newly Published Customizable Mount Generator Http://Www.Thingiverse.Com/Thing:2023426 I Have Had An Issue With The Size Of Smaller Cameras. If You Want To Use The Lightest Option On A E010, H36 Or Similar Every Thenth Of A Gram Gives You A Longer Endurance And Lift. Therefore Only 2 (Origin) Screws Needed.This Mount Can Be Printed With A Weight Of 0.4G. So, I Did A Quick And Dirty Optimization For The 3.4G Fatbee Fb90 Aio Spare Camera From Banggood Http://Www.Banggood.Com/Eachine-Fatbee-Fb90-Micro-Racing-Quadcopter-Spare-Parts-5_8G-25Mw-48Ch-Vtx-520Tvl-Cmos-14-Camera-P-1108072.Html The E010 With Original Frame, Two Blade Props Chopped From Origin, Mylipo 235Mah 4.35V Hv Battery, Camera Mount And Fb90 Camera Has A Flight Weight Of 25.8G. Could Be Reduced Wth A Lighter Frame And Removed Heat Tube From Antenna To App. 24G. Update 2017-04-05: The Cm275T Camera Http://Www.Banggood.Com/Cm275T-5_8G-25Mw-48Ch-Ntscpal-Mini-Vtx-600Tvl-Fpv-Camera-For-Diy-Micro-Fpv-Racer-P-1102464.Html Seems To Be Identical To The Fb90 Cam Except For The 600Tvl On The Cm275T (The Sensor Does On Both Cams 480Ntsc/540Pal Lines Only). Stl Has 15° Or 10° Camera Angle. Other Angles Can Be Done By Changing The Scad File. Due To The Big Capacitor On Th Right Side Of The Origin Board A Small Plastic Part To Be Placed Below The Mount On The Left Side (See Picture) To Get The Camera Mounted Levelled.

Statistics

Likes

17

Downloads

0

Category

R/C Vehicles