ANET A8 | V2 Rear Bed Level Sensor Holder - Customizable
Description
I Further Remixed The Rear Sensor Holder... This Time A **Customizable** Design And Featuring Also A *Screwable Clamp* For Easy Installation And Removement! The General Idea Is From [Lucacap](Http://Www.Thingiverse.Com/Lucacap)'S Rear Bed Leveling Sensor Holder (Http://Www.Thingiverse.Com/Thing:1883473). All Credit For The Fantastic Design And Idea Goes To Him! Nevertheless, The Original Design Requires To Tap Threads Into The Metal Bearing. This Modified Design Is Equipped **With Plasic Dowels**, Which Fit In The (Non-Threaded) Holes On The Back Of The Linear Slides And Are Secured With M3 Screws (E.G. M3 X 10Mm). **No Thread Taping Required!** The Download Section Holds The Basic Vairants For A 18Mm, A 12Mm As Well As For A 8Mm Sensor! **For Further Options Or Versions Use The Customizer!** **Variants:** * **Clip** - As The Version Before With Further Improvements And Customizable Parameters * **Screw** - Use A Screwable Clamp To Secure Your Sensor To The Back Of Your Linear Slide! This Enables Easy Installation And Removement And Does Not Allow The Sensor To Move At All. **Note:** Depending On Your Sensor And Your Cable Management You May Loose Some Centimeters Of Available Print Height Due To A Interference Of Sensor And Printer Frame. <Br> **Firmware Configuration:** Due To The Altered Sensor Position The Following Changes Have To Be Done In The `Configuration.H` File (Search Vor The Capitalized String And Adapt The Subsequent Numbers): *[With My E3Dv6 Mount / Carriage](Http://Www.Thingiverse.Com/Thing:2099577):* `#Define X_Probe_Offset_From_Extruder 0` `#Define Y_Probe_Offset_From_Extruder 51` *With The Stock Carriage:* `#Define X_Probe_Offset_From_Extruder 26` `#Define Y_Probe_Offset_From_Extruder 51` *Additionally For All Setups:* `#Define Front_Probe_Bed_Position 51` ** *Note:* ** If You Added A Custom Offset, Adapt The Y-Parameters Above Correspondingly! <Br> (Note For Those Who Don'T Own A Sensor Yet: I Use [This Sensor](Http://Amzn.To/2Kpzqi4))
Statistics
Likes
457
Downloads
0