2020 Extrusion Panel mounts
Description
This Panel Mount Allows Plexiglas Panels Or Other Panel Materials To Be Mounted Within 2020 Aluminum Extrusion Frames. I Used Them To Add A Panel To The Bottom Of My Hypercube Printer. The Mounts Provide The Advantage Of Placing The Mounting Hole Well Away From The Edge And Putting Gentle Pressure On A Wider Area Rather Than A Concentrated Screw Hole So That Cracking Is Less Likely . Using These Mounts Also Makes The Panel Easy To Remove Without Internal Access. To Use These Panel Mounts, Drill A 6 Mm Hole In The Panel 12 Mm From The Edge. Attach The Mount With The Bushing And A 3 Mm X 8 Mm Screw And Washer. Use A 5 Mm Screw And Extrusion T-Nut To Mount The Other End To Your 2020 Extrusion. The Bushing Hole Is Self Tapping. The Mount Is Designed For 3 Mm Thick Panels But Can Be Used With Thicker Panels. For Thinner Panels, You May Need To Shorten The Bushing. This Is The Hypercube Printer I Am Using These Panel Mounts On. Http://Www.Thingiverse.Com/Make:272257
Statistics
Likes
36
Downloads
0