Nintendo Switch Con U v2 (for 0.5mm nozzle)

Description

I Increased Each Rail Thickness By 0.1Mm In Meshmixer. In The Model'S Original Form, My Slicer Wouldn'T Pick Up The Rail As A Feature At All For My 0.5Mm Nozzle. My First Print Came Out With No Joy-Con Rails. It Was A Little Snug Sliding On An Off, But That Might Be More An Issue With My Printer Getting On In Age And Needing More Fine-Tuning And Nozzle Maintenance. Ymmv

Statistics

Category

Tags