Anet A8 Bed Level Upgrade
Description
This Is A Better Way Of Adjusting The Screws On Your Anet A8 When Levelling The Bed. This Mod Requires You To Drill Out The Threaded Holes In The Aluminium H Frame (Use A 3Mm Drill Bit), They Will Wear Out Eventually Anyway. Push The Wingnut Into The Thumb Wheel. Use A Spare M3 Nut To Clamp The Screw To The Heated Bed. Fit A Cup On Either End Of The Spring, Place It Over The Screw And Press The Screw Through The Enlarged Hole In The H-Frame And Screw On The Wingnut. To Level The Bed Now, There Is No Need To Use A Screw Driver. Hope You Like This Upgrade.
Statistics
Likes
898
Downloads
0