Weather Station
Description
This Is A Diy Weather Station I Design For A College Project. All Stl Files I Printed On An Ultimaker 2 With Default Settings. These Are All V1 Models. The Measurements For The Attachments Between The Support Arms And The Rain Gauge Housing (Case_With_Attachement.Stl) And The Main Housing (Weather_Station.Stl), Are Slightly Wrong So I Had To Sand Down Parts Of The Print To Make Them Fit. I'Ll Reupload Corrected Models As Soon As I Get A Chance. The Anemometer Assembly Is Measured To Take An M8 Threaded Bar And 2 Bearings. The Support_Arms.Ai Are Designed To Be Laser Cut. The Design Is For Any Material That Is 5Mm Thick, And Can Be Slotted Together To Make Rigid Structures. I Used A Sheet Of Acrylic, 1000X500X5Mm, And The Arms Came Out Nice And Strong. They'Re Should Slide Over Any 20Mm Diameter Pole, However I Haven'T Yet Taken Into Account That They Can Rotate Freely About The Pole And Will Need To Be Fixed In Place.
Statistics
Likes
22
Downloads
0