Adjustable RepRap Full Graphic LCD Mount Ultimaker
Description
Particularly Usefull If You Have Your Printer On A Higher Shelf. This Way You Can Point The Lcd Screen Facing Downwards. In My Case The Printer Is On A Shelf Above My Desk. I Used Hot Glue To Mount The Bracket To The Ultimaker. This Way You Can Later Remove The Bracket Without Leaving A Drilled Hole In The Front. You Will Need: 4× 3Mm Screws (Length Depending On The Thickness Of Your Lcd Cover/Case) 1× 4×16Mm Screw 4× M3 Nuts 1× M4 Nut
Statistics
Likes
3
Downloads
0