Tronxy X3 E3D V6 mount
Description
Mount For A Tronxy X3 To Use An E3D V6 Hotend (Clone) The Center Hole For The Shaft Is 12Mm In Diameter And 6Mm Thick, The Recessed Diameters Above And Below Are 16Mm In Diameter And 1Mm Thick. This Fits My Gearbest E3D V6 Clone Machine Tight. The Mounting/Clamping Screw Holes Are 3.5Mm Diameter And 15Mm Apart Center To Center. You Will Need Two 3Mm X 40Mm Screws To Mount This.
Statistics
Likes
27
Downloads
0