Addi Express Foot Extender
Description
Addi Machines Usually Come With Two Metal Clamps Which Grab The Feet And Then Clamp To The Table. I Have Seen Several Other People Doing Like I Was And Using A Bar Clamp To Try And Hold The Top Of The Machine To The Table. I Designed This To Cup The Feet And Extend Them Out A Little. I Would Recommend Printing Them Upside Down So No Supports Will Be Required. Though You Can See Where The Feet Would Go In And There Is A Space To Allow The Piece To Go On The Leg. Fyi The Feet Measured About 32Mm And The Leg Was About 22.5Mm.
Statistics
Likes
14
Downloads
0