Joy Con Thumbstick Cover - Push On
Description
These Are A Simple Joystick Covers For Your Nintendo Switch Joy Cons. My Ultimate Goal For These Is To Sand And Paint Them, And As Such They Can Be A Little Rough Of Your Thumbs, But I Am Used To Playing With Metal Joysticks So They Are Fine For Me. I Am Going To Try Standard Spray Paint As Well As Plastidip And See Which Is More Comfortable. I Printed Them With Supports And With The Bottom Of The Cover Flat On The Print Bed. Here Is The Feature List/Issues That I Was Trying To Solve When Making Them. -Simple Push On Design With A Snug Fit That Does Not Allow The Cover To Wiggle Or Turn Independent Of The Joystick. -Enlarges The Joystick Only Slightly While Protruding No Lower That The Original Joystick To Still Allow For Full Mobility Of The Joystick, While Making It Easier To Grip And Maneuver. -Fashioned After A Ps4 Joystick With The Convex Hump In The Middle Followed By A Large Ridge On The Outside. I Also Added 6 Notched Around The Outside To Give Better Grip When Rolling Your Thumb Around The Outside. This Design Provides A Better Interior And Exterior Surface And Grip On The Joystick That The Original Model. -Protect Your Joystick Surface Allowing You To Simply Replace The Cover Instead Of The Joystick.
Statistics
Likes
62
Downloads
0