Robo3d R1 Titan
Description
This Is The Robo3D R1 Titan. ***It Is Heavily Inspired By/Influenced By/Based On The Robo Beast By "Dbefore"*** Http://Www.Thingiverse.Com/Thing:922004 I Wanted To Quickly And Cheaply Extend My Build Height (Z-Axis), With A Design Using A More Modular Approach. My Build Currently Uses 700Mm Smooth Rod & Lead Screws, But This Can Easily Be Extended To 1000Mm Or More. Maybe Someone Is Up To The Challenge. You Will Need: - 3D Print 2 Sets Each Of The Robo3D Zspacer Left And Right. - 2 X 10-Foot Lengths Of 1/2 Inch Pvc Pipe (Lowes Or Home Depot $ 2.50 Ea). Get The Thick Walled Version. - 2 X Smooth Rods, 8Mm X 700Mm (Approx 30 Inches). Make Sure They Are Stainless. Available On Amazon Or Aliexpress. - 2 X Lead Screws, They Need A Pitch Of 2Mm, A Lead Of 4Mm And Should Be 700Mm In Length (No Firmware Mods Required). Save Yourself Some Coin And Just Opt For Aliexpress... $12. - 4 Extra Nuts And Bolts. (I Used What I Had On Hand) - Optional: Z Axis Stabilizers Of Your Choice. (Whatever Helps You Sleep Lol). Put It Together: - Swap Out The Smooth Rods.... Drop In Replacement. Be Careful With The Bearings. - Swap Out Those Tiny 300Mm Lead Screws. So Many Videos On This. - If You Purchased 700Mm Parts, Cut Your Pvc Pipe Into 16 X 11Inch Sections. - Bolt Everything Together, Saving The Top For Last. - Do A Function Test... Then Lengthen All Of Your Wires To Your Specific Requirements. Https://Youtu.Be/Syhet68Zndg This Is Still A Work In Progress.
Statistics
Likes
32
Downloads
0