LED Balloon Insert
Description
An Insert To Put A Dip Type Led Inside A Balloon And Allow It To Be Filled And Tied Off Easily. Has Recess In The Bottom For A 2X10Mm Magnet. This Works With The Throwie Kit That We Sell At Lilyleds Http://Www.Lilyleds.Com/Products/113/Led-Throwies The Grooves Are For Tie-Off'S Or Elastics. It Will Need A Plug For Inside The Bottom Or Could Put Some Thin Tape Or Something Over The Magnet Before Inserting It To Give A Good Seal. Could Also Be Used As A Thrust Or Propellant Device For Balloon Powered Vehicles. I Printed One On A Makerbot And It Needs To Be Upscaled Maybe 3-4% For The Pieces To Fit In. It Did Print Better Horizontally, Edit This In The Browser In Its Original Location On Orchard: Https://3Dorchard.Com/App/Single/58704Cac3718E40C0498D0B1/58E8F3121535440C7C94E12E
Statistics
Likes
7
Downloads
0