2019 D6 WANHAO E3D GANTRY - NO MORE ROD REMOVAL!!
Description
Https://Youtu.Be/Wa2Zz4Lhheo Finally Fixed My Printer & It Is Now Running My Latest Redesign. Yeah!! 01-2019 03-2019 - Bad News I Think I Have Some Layer Shifting Possibly Bad Belt Somewhere 2019 No More Gantry Rod Removal For Gantry Base & Duct!!!!! Will Need To Print The Fan Duct & E3D Clamp & Ir Sensor Bracket In Petg Or Pc. Will Need At Least (2) 3Mm Square Nuts ( Could Use Up To 10 Square Nuts In Certain Configurations.) Will Need At Least (4 ) 40Mm Long 3Mm Screws & (2) 14Mm Long Screws, (Allen Heads Recommended.) 3/4" Surgical Tubing I Got From Ebay. 90Mm Fan Got From Amazon. Duet Wifi Setup Got From Filastruder. I Have Plans To Use The Knock Off Drylin Bearings I Found On Aliexpress They Require A Different Gantry Block Because They Have To Be Compressed To Work Correctly Or So Says The Research I Have Done. So The Bearing Diameter Hole Is Decreased To 11.9Mm From The Original 12.2Mm Please Consider Donating $5 Thru Paypal Skuibreaker@Gmail.Com
Statistics
Likes
30
Downloads
0