ESP-12F (ESP8266) programmer

Description

Programming Fixture For Esp-12F Modules. Requires: 16 Pcs. Pl75-B1 Spring Test Probes. 1 Pcs. Wemos D1 Mini With Esp-12F Module On Board. Remove The Esp-12F Module From The Wemos Board (Use Heat Gun). Clean The Wemos Board And Glue (Epoxy) The Printed Center-Block To The Wemos Board (Assemble The Full Fixture To Align The Wemos Board And The Center Block While The Epoxy Is Hardening). Mount The Test Probes In The Center-Block And Solder To Wemos Board. The Esp-12F Module Must Be Held Against The Test Probes During The Programming.

Statistics

Category

Tags