Yet another Ramps+Arduino Mega 2560+LCD 12864 + tinyfan enclosure
Description
- This Kit Has Been Designed To Be Printed In Several Parts Then Glued Together. - In View Of Commissioning The Second Extruder I Needed A Fan Extender. This Small Device Hangs Out From The Ramps Board, Then I Had To Design Larger Enclosure. - In The Prototype I Designed The Slots For Two Fans, But After Printing I Found Out That One Is Noisy Enough And In Any Case I Don'T Have Enough Space For Both Of Them. I Originally Designed All The Slots Using Several 3D Models Of Ramps+Arduino And Lcd12864 Found On Internet. Then, I Realized That My Hardware Didn'T Match 100% With 3D Models. It Was Slightly Different, Specially In Connectors Size And Position. For The Same Reason I Preferred To Design The Front Board Separated By The Rest Of Lcd Shell I Left Some Clearance Around The Slots, So I Don'T Expect That You Can Have Too Much Problems, But If You Really Need Some Adjustments Ask Me And I'Ll Make Your Dedicated Stl File. I Also Put My Name On The Top Lid And On The Lcd Shell. If You Want Your Own, Ask Me And I'Ll Prepare A Dedicated Stl File For You. Edit 25/05/2019: Added Front File With Two Holes For Fans. File Name Is: Ramps_Encl - Front_Side-2Fans.Stl
Statistics
Likes
34
Downloads
0