Squirrel Cage Fan MK1
Description
Print Specs 2 Shells 15% Infill No Support Material Pla Material For High Heat Applications Pc-Iso (Polycarbonate Iso Or Ultem) This Part Was Originally Printed In Pla With 2 Shells And 15% Infill As A Tester The Pla It Can Be Used For Low Temperature Applications (Pla Will Not Hold Up To High Heat Applications). This Squirrel Cage Fan Was Installed In A Bathroom The Fan Is Next To A Heat Lamp And The Failure Mode Is Documented Above. The Final Part Was Printed In Pc-Iso (Polycarbonate Iso Not Ultem) On A Commercial Machine Final Part Settings: Pc-Iso Fortus 400Mc Solid Fill Dissoluble Sr-100 Support 0.010In Layer Height Time: ~10 Hours
Statistics
Likes
12
Downloads
0