Anet A8 E3D V6 carrier with adjustable Tronxy sensor mount
Description
This Is A Mix Of Two Things I Mixed With Thinkercad. Contact Me If You Are Interested In The Sourcefiles. The Main Part Is The E3D V6 Clone Carrier To Mount It On Anet A8 Printer, The Addition Is A Nicely Adjustable Mount For A Tronxy Auto-Bedlevel-Sensor I Was Totally Happy As I Found It On Thingiverse. The Sensor Mount Can Be Adjusted Very Exactly. The Sensor Himselfe Is Mounted With Double-Sided Tape Or Glue, Whatever You Prefer (I Took Both :)) The Carrier Works With The Vanilla Bearing Mounts And Needs A Printed Belt-Holder. You Can Use Your Already Used Fan-Duct With The Original Fan. Its Just Moved 90 Degree To The Left Side. As You Can See On The Pictures The Cable-Chain-Mount I Used With The Original Anet Direct Drive Carrier Isn'S Fitting Very Good Anymore But It Works. You Will Have To Add A Spring, A About 30Mm M3 Screw And A Suitable Nut. In Skynet Firmware I Adjustet The Probe Position To X -45Mm, Y 0Mm. My Next Version Will Have A Cable-Chain Mount Directly Added, Also The Sensor Mount Will Be Moved A Bit Towards The Hotend To Make The Whole Construction A Bit (Guess About 10-15Mm) Smaler And To Gain More Room On X-Axes To The Right. But So Far It Works Really Great! Hope You'Ll Enjoy It! A Really Big Thx To The Original Designers Of The Two Baseparts, You Did Amazing Work!
Statistics
Likes
62
Downloads
0