2016 Ghostbusters Reboot Valve Bracket
Description
(Note: I Have Reworked The Pipe That Holds The Real Valve, The Detail On The Right Side, Which I Made It Stronger To Either Attach A V-Shaped Hook For The Gun Or Add A Big Magnet Inside. Also, Please Note: The Dimensions Of The Pipe Now, Close To Accurate, Is 25 Mm Outside (Wide Enough To Hold The Weight), And 20.5 Mm Inside (Inside Being The Most Accurate To Fit The Valve'S Connection)). Also, Added The Top Plug, Which Fits Really Snug. I Have Based My Design Concept From "Thelegendofmart", And Customized It Using The Actual Measures Of The Real Connector, And The Tube Of A Real Valve. I Have Added A "Floor" Inside The Box, So It Could Conceal The Hose Attachment, Which Is Open For Customizing. Not 100% Accurate By Any Means (Hey, It'S 3D Print Instead Of The Real Thing), But Really Close. It Should Fit The Real Connectors And Valve Snug. The Lip That Holds The Valve Pipe Was Made 5 Mm, To Support The Weight Of The Real Valve. It Might Require Sanding Inside The Openings, Of Course. One Of The Files Has The Supports Already, So Be Mindful. All You Need Is To Come Up With An Idea To Make The Fake "Weld" Around The Valve Tube Holder. The Hole For The Connector Needs To Be Grinded Off A Little Bit With A Dremel Tool, And The Screw Holes Are A Little Off Center, That You Will Need To Drill As Well.
Statistics
Likes
6
Downloads
0