MAKERBOT DUAL PRINTING WORKFLOW WITH SETTINGS
Description
My Custom Workflow And O And A Fake Stl To Keep Thingiverse Happy Lol Edit Slic3R 1.1.5 Seems To Have Fixed All The Issues Way To Go Slic3R Team (Bigger Models Can Be Done Supports Fixed Its Been Improved Dramatically So Check It Out) I Always Print With Abs Paste Dont Forget To Lookup Http://Www.Thingiverse.Com/Thing:272472 Link To Custom Bolt Type Filament Holder To Replace The Ones In The Original Machines As They Are Too Large To Handle Most Filament Rolls Http://Www.Thingiverse.Com/Thing:276080 Please Uninstall Makerware If You Have Its Crap It Tries To Take Over Try Http://Www.Thingiverse.Com/Thing:1206 With Makerware Then My Workflow And Watch As It Actually Prints Correctly (The Eyes Need To Be Edited Slightly To Print Correctly For Either Program Look At The Ears Instead To Understand What I Mean If You Don'T Want To Edit) Note Makerware Can Be Forced To Use Skeinforge By Using The Best Quality Setting And Still Cant Do The Bear At Http://Www.Thingiverse.Com/Thing:1206 You Can Look With Makerwares Print Preview Without Printing Updating Firmware From 7.2 To 7.5 Will Make You Lose Fat32 And Sdhc Support To Use Fat16 Download The Below Link And Delete The Partition In You R Sd Create A New One As A Primary Partition And Make It Under 2Gb In Size Format To Fat 16 And Your Goood To Go (Or Just Buy A Smaller Drive) It Is Recommended You Upgrade Http://Software-Files-A.Cnet.Com/S/Software/13/48/81/62/Epm.Exe?Lop=Link&Ptype=3001&Ontid=2248&Siteid=4&Edid=3&Spi=29Cb9E7Fb487Deb999F3Cf73742A7B66&Pid=13488162&Psid=10863346&Token=1395409151_D21793979D39Ea844B24A2D226Ab4F19&Filename=Epm.Exe V2 With Pics Is Here :) V3 Is Here With Fixes To Rep Host (Forgot To Add The Setup Its There Now) V1 Videos Are Here Check It Out :) (Swf Files)
Statistics
Likes
11
Downloads
0