Anet A8 - Filament Pulley
Description
Updates 17/09/2017 Uploaded A New Version (V2, Which Is Rectangular), With No Small Pieces. Easier To Print, Easier To Assemble, And A Bit Shorter. In Case You Want To Print This One, Then Print None Of The Files Called 'Shafts' And Choose The 'V2' Files. You'Ll Need The Same Two Bearings. Works Either For Stock A8 Frame Or For Am8 Frame (2Xm5X10 Bolts And 2Xm5 T-Slot Nuts Needed) Works For 8Mm Thick Acrylic Frame. Can Be Easily Changed Upon Request. You'Ll Need: 2X 608Zz Ball Bearings 4X M3X30Mm Bolts 4X M3 Nuts 8X M3 Washers (Optional) Pieces To Print: 2X Side Plate 2X Pulley Shaft (None If You'Re Printing V2) For All But Those Two: 1X Of Each Frame Support Prints Better With Supports. You Can Either Print It In Its Final Position (Supports Where The Frame Will Be) Or Upside Down (Supports Where The Bearing Will Be). I'D Recommend The First Option. Feedback Is Welcome!
Statistics
Likes
89
Downloads
0