Cam/Light Tripod Pivot Head
Description
There Are Tons Out There For This, But All I Saw Needed Hardware Added Or Were Weird Or Complicated. If You Have Flex Filament You Can 100% Print This Without Any Extra Hardware Needed To Work. There Is A 1/4-20 Threaded Pivot Head For Printing In Regular Pla/Abs/Petg Materials And Sink A Screw/Threaded Rod Into It If You Don'T Have Flex. The Threaded Stub Is Just Too Small For Hard Plastics As They Will Just Break At A Layer Somewhere. Simple Bolt, Main Body And Pivoting Head. Main Body Is 1/4-20 Threaded For Standard Camera Tripods. Slide Pivot Head Into The Main Body, Insert Bolt Through And Tighten To Clamp In Place. **If You Download Keep An Eye Out As I'Ll Likely Edit The Pivot So All The Crappy Supports Aren'T Needed That Scar Up The Bottom *(As You Can See In My Image)* **
Statistics
Likes
7
Downloads
0