Spinny Cube
Description
Update: Mistake On My Part, Body_2 Now Includes The Ring For Mounting The Bearing. Not Exactly Sure How The First .Stl Did Not Include That. This Spinny Cube Was Inspired Off From A Design I Saw On Reddit. That Spinner Was Still In Production And I Wanted To Have It In My Hands Now. [Demo Video](Https://Youtu.Be/Ln0Qcmnfzds) The Body: The Current Body I Have Made Is Designed To Use 608 Bearings. For Printing, I Left This Flat On Its Side And Used 50 Degree Supports. This Will Require Some Cleaning To Make Smooth The Caps: These Caps Were Printed On Their Flat Faces. Both Caps Are Important To Print. Each Cap Has A Slightly Different Alignment Between The Helix Connector In The Center And The Nubs On The Outside. The Caps Should Be Almost Flush In The Cube When In Place. A Vice Or Press May Be Needed To Press These Into Place, I Plan On Making A Flat-To-Cube-Sided Adaptor To Make This Easier. Expect To Do Some Sanding On The Rounded Faces To Obtain The Smoothest Spin.
Statistics
Likes
136
Downloads
0