Fidget Spinner with nuts
Description
This Was Made From A Tutorial By The 3D Printing Nerd, Go Check His Youtube Channel Out. Note: V02 Has Thicker Connections So That It Is Stronger, Plus Rounded Edges For Smoother Fidgetting Note: If The Nut Or Bearing Holes Are Too Small, Quickly Pass A Flame Around The Hole, Then Slightly Push On The Edge In A Circular Motion With Something Like A Rod Or A Screw Drive(But Not The Head. Do Not Heat For Too Long. This Method Takes A Bit Of Practice, Just Be Patient. Also, If You Do Not Want To Do It The Fast And Pretty Way, You Can Always Take A File To The Inside. Note: Oh And Before I Forget. They Are 1/2 In Nuts. But If You Meausure Flat Edge To Flat Edge It Is 19 Mm And From Point To Point It Is About 22 Mm. The Inner Diameter Is 12-13Mm
Statistics
Likes
9
Downloads
0